description APC Smart-UPS SRT 2200 Overview
The APC Smart-UPS SRT 2200 is a high-performance UPS designed for critical applications. It delivers 2200VA/1600W of pure sine wave power, ensuring compatibility with sensitive equipment. Network management capabilities allow for remote monitoring and control, and the LCD display provides detailed status information. AVR automatically regulates voltage fluctuations.
It offers rackmount and tower configurations, making it suitable for various environments. It's ideal for data centers and server rooms.
info APC Smart-UPS SRT 2200 Specifications
| Weight | Approximately 23 kg |
| Topology | Double-Conversion Online |
| Warranty | 3 Years (Electronics), 2 Years (Battery) |
| Dimensions | 432 x 85 x 505 mm |
| Form Factor | Tower/Rack Convertible |
| Battery Type | Sealed Lead-Acid, Hot-Swappable |
| Transfer Time | 0ms (online mode) |
| Output Voltage | 230V (configurable) |
| Power Capacity | 2200VA / 1600W |
| Output Waveform | Pure Sine Wave |
| Communication Ports | USB, Serial, RJ-45 Network (SNMP) |
| Input Voltage Range | 160-280V |
| Surge Energy Rating | 480 Joules |
| Typical Recharge Time | 3 Hours to 90% |
balance APC Smart-UPS SRT 2200 Pros & Cons
- Pure sine wave output ensures compatibility with sensitive electronics like servers and workstations
- 2200VA/1600W capacity provides substantial power protection for critical equipment
- Integrated network management card enables remote monitoring and automated shutdown
- Hot-swappable battery allows replacement without interrupting protected loads
- Automatic voltage regulation (AVR) corrects power fluctuations without battery drain
- LCD interface provides real-time status updates including load percentage and runtime
- Heavy and bulky form factor makes wall-mounting or movement difficult without assistance
- Premium pricing significantly higher than basic UPS models with similar capacity
- Network setup required for full feature access adds complexity for non-technical users
- Battery replacement cartridges can be expensive when eventually needed
- Audible alarm can be disruptive in quiet office environments if not properly configured
help APC Smart-UPS SRT 2200 FAQ
What devices can the APC Smart-UPS SRT 2200 protect?
The SRT 2200 protects servers, workstations, storage systems, and network equipment requiring up to 1600W. Its pure sine wave output makes it safe for sensitive electronics, medical devices, and equipment with active PFC power supplies.
How long will it run during a power outage?
Runtime depends entirely on connected load. At half load (800W), expect approximately 10-15 minutes. At full load (1600W), runtime drops to around 3-5 minutes. Additional external battery packs can extend runtime significantly.
Can the battery be replaced without shutting down protected equipment?
Yes, the SRT 2200 features hot-swappable batteries allowing replacement while maintaining power to connected devices. The process involves powering off individual modules, not the entire UPS, ensuring continuous operation.
What network management features are available?
The built-in network management card supports SNMP, web-based monitoring, and integration with APC's PowerChute software. Users can remotely view status, configure alerts, perform graceful server shutdowns, and integrate with data center management systems.
Is this UPS suitable for home or small office use?
While technically capable, the SRT 2200 is over-engineered for typical home use. It's designed for small data centers, server rooms, and enterprise environments where network manageability and reliability are critical requirements.
What is APC Smart-UPS SRT 2200?
How good is APC Smart-UPS SRT 2200?
How much does APC Smart-UPS SRT 2200 cost?
What are the best alternatives to APC Smart-UPS SRT 2200?
What is APC Smart-UPS SRT 2200 best for?
Small server rooms, data closets, and mission-critical equipment requiring reliable, manageable power protection with remote monitoring capabilities.
How does APC Smart-UPS SRT 2200 compare to APC Back-UPS Pro BR1500MS?
Is APC Smart-UPS SRT 2200 worth it in 2026?
What are the key specifications of APC Smart-UPS SRT 2200?
- Weight: Approximately 23 kg
- Topology: Double-Conversion Online
- Warranty: 3 Years (Electronics), 2 Years (Battery)
- Dimensions: 432 x 85 x 505 mm
- Form Factor: Tower/Rack Convertible
- Battery Type: Sealed Lead-Acid, Hot-Swappable
explore Explore More
Similar to APC Smart-UPS SRT 2200
See all arrow_forward
Reviews & Comments
Write a Review
Be the first to review
Share your thoughts with the community and help others make better decisions.
