zoom_in Click to enlarge

TCP Dimmable BR40

▲ ▼

language

description TCP Dimmable BR40 Overview

The TCP Dimmable BR40 is an LED reflector bulb designed to cast a broad flood of light from compatible recessed or track-lighting fixtures. BR40 identifies its bulged-reflector shape and approximate five-inch diameter, while dimmable versions can vary their output when paired with a compatible dimmer. It is intended for large recessed cans and spaces needing wide-area illumination rather than the narrow beam of a spotlight.

help TCP Dimmable BR40 FAQ

What incandescent wattage does the TCP Dimmable BR40 LED bulb replace?

The TCP Dimmable BR40 LED bulb typically replaces a 65-watt or 85-watt incandescent BR40 floodlight while consuming only about 14 to 17 watts of power. This represents an energy savings of roughly 75 to 80 percent while producing a comparable lumen output in the 1,000 to 1,200 lumen range.

Will the TCP Dimmable BR40 flicker with older TRIAC wall dimmer switches?

Older TRIAC-based dimmer switches that are not rated for LED loads can cause flickering, buzzing, or a very limited dimming range with LED bulbs including the TCP BR40. For best results, pair the bulbs with a dimmer specifically labeled as LED-compatible, such as those from Lutron's Diva or Maestro CL series.

Can I use the TCP BR40 LED bulb inside fully enclosed light fixtures?

Many TCP BR40 LED bulbs are rated for use in damp or open fixtures, but you should check the specific product packaging to confirm whether the bulb is rated for fully enclosed fixtures. Using a non-enclosed-rated LED in a sealed can light will cause heat buildup that can significantly shorten the bulb's lifespan.

swap_horiz

Looking for TCP Dimmable BR40 alternatives? Compare top competitors ranked & scored

arrow_forward