Veepeak OBDCheck BLE+

The Veepeak OBDCheck BLE+ is compatible with a wide range of OBD-II diagnostic apps on both iOS and Android, including OBD Fusion, Car Scanner, BimmerCode (for BMW coding), and Torque (Android). Because it uses Bluetooth Low Energy, it works natively with iPhones without requiring a Wi-Fi adapter, unlike older Bluetooth Classic scanners that were Android-only. App compatibility depends on the vehicle's OBD-II protocol support.

Yes, the OBDCheck BLE+ is specifically designed to work with iOS devices using Bluetooth Low Energy, which pairs directly with iPhones and iPads without requiring Wi-Fi. This is a key advantage over older Bluetooth OBD-II adapters that relied on Bluetooth Classic (SPP), which iOS does not support for this purpose. You simply pair the adapter in iOS Settings and connect through your chosen app.

Yes, when paired with a compatible app like OBD Fusion or Car Scanner, the Veepeak OBDCheck BLE+ can both read and clear diagnostic trouble codes (DTCs) that trigger the check engine light. Clearing codes turns off the light, but if the underlying issue persists, the light will reappear after the next drive cycle. The adapter itself is a pass-through device—the app provides the functionality.

The Veepeak OBDCheck BLE+ primarily supports standard OBD-II protocols, which cover engine and emissions-related diagnostics. Accessing ABS, airbag (SRS), and other manufacturer-specific body module codes depends on the vehicle make and the app used—some apps like Car Scanner offer limited manufacturer-specific diagnostics for certain brands. Full access to all body modules typically requires a more advanced, brand-specific diagnostic tool.