Best Coil Spring

The Old Man Emu Front Coil Spring Set 4007 is a specialized vehicle suspension component manufactured by ARB Corporation for off-road applications. Designed and tested in Australia, this coil spring set is engineered to alter the ride height and load-carrying capacity of specific four-wheel-drive ve...

Old Man Emu Front Coil Spring Set 4000 is an Australian-made, vehicle-specific pair using X5K micro-alloyed steel and double-scragging to resist stress and sagging.

Old Man Emu Front Coil Spring Set 4004 is an Australian-made suspension pair using micro-alloyed spring steel, precision forming, and a durable powder-coated finish.

Old Man Emu Front Coil Spring Set 4001 is an Australian-made, vehicle-specific pair formed on precision mandrels and double-scragged for consistent durability.

Old Man Emu Front Coil Spring Set 4005 is an Australian-made, vehicle-specific pair tuned for defined load and ride-height needs rather than universal fitment.

The Old Man Emu Front Coil Spring Set 4011 is a suspension component manufactured by ARB Corporation for four-wheel-drive vehicles. Old Man Emu is an Australian suspension brand specializing in heavy-duty off-road upgrades. These specific coil springs are engineered to handle increased vehicle loads...

Old Man Emu Front Coil Spring Set 4003 is an Australian-made, vehicle-specific pair of matte-black coils designed to work with matched Old Man Emu dampers.

The Old Man Emu 4019 is a front coil spring set manufactured by ARB's Old Man Emu division, which specializes in off-road suspension components. Engineered and tested in Australia, these springs are designed to handle specific vehicle weight configurations and provide enhanced ride quality and lift...

The Old Man Emu Front Coil Spring Set 4006 is a heavy-duty suspension component manufactured by the Australian off-road equipment company ARB. Engineered for four-wheel-drive vehicles, this matched pair of coil springs is designed to accommodate vehicle lifts and support additional front-end weight...

The H&R Sport Spring 50406 is a German-made progressive spring kit engineered specifically for 1985 to 1991 BMW 325e E30 models. The component is designed to lower both the front and rear suspension of the vehicle by approximately 1.3 inches, effectively lowering the car's center of gravity. This pr...

The Eibach PRO-LIFT-KIT is a suspension enhancement system designed to raise the ride height of off-road-oriented cars, crossover utility vehicles, and light trucks. Manufactured by Eibach, a German automotive components company, the system uses application-specific coil springs to provide increased...

H&R Sport Spring 51894 is a German-made progressive kit for non-hybrid 2022-2026 Honda Civic sedans and hatchbacks, lowering both axles about 1.2 inches.

The H&R Lift Spring 51621 is a suspension component manufactured in Germany specifically for all-wheel-drive Ford Maverick models from 2022 onward. Unlike simple suspension spacers, this kit consists of replacement coil springs engineered to increase the vehicle's ride height and ground clearance. I...

H&R OE Sport Spring 50404-55 is a German-made lowering spring kit for 1985-1991 BMW 325e E30 models, reducing front and rear ride height by about 1.0 inch.

The H&R Sport Spring 51620 is a performance automotive lowering spring kit manufactured by H&R Spezialfedern, a German suspension components company. This specific part number is engineered for 2022-2026 Ford Maverick all-wheel drive models. The progressive-rate springs are designed to reduce ride h...

TEIN HIGH.TECH is a line of lowering coil springs manufactured by TEIN, Inc., a Japanese automotive suspension company founded in 1985. These springs are engineered to provide a moderate reduction in ride height compared to TEIN's S.TECH line, with a focus on maintaining comfort for daily driving. T...

Eibach SPORTLINE 4.10985 is a four-spring lowering kit for the 2010 Volkswagen GTI 5K 2.0 TFSI, supplied with front and rear bump stops.

H&R Super Sport Spring 50406-77 is a German-made kit for 1985-1991 BMW 325e E30 models, distinguished by approximately 1.6 inches of lowering at both axles.

H&R Super Sport Spring 51893 is a German-made kit for non-hybrid 2022-2026 Honda Civic sedans and hatchbacks, providing about 1.4 inches of lowering at both axles.

The TEIN S.TECH kit is a Japanese lowering-spring set for the V36 Infiniti G37 Coupe, which replaced the G35 Coupe for the 2008 model year.

The TEIN S.TECH kit is a lowering-spring set for the CL9 Acura TSX, the North American luxury-market counterpart of the Japanese Honda Accord.

H&R Race Spring 50404-88 is a tuner-fitment kit for 1985-1991 BMW 325e E30 models, lowering the front about 2.2 inches and the rear about 2.1 inches.

The TEIN S.TECH kit is a lowering-spring set for the V35 Infiniti G35 Coupe, a rear-wheel-drive model related to Japan's Nissan Skyline.

The TEIN S.TECH kit is a lowering-spring set for EM1, EJ6, EJ7, and EJ8 Honda Civics, covering several sixth-generation coupe variants.

The TEIN S.TECH kit is a lowering-spring set for the V36 Infiniti Q60, the name adopted in 2014 for the previously branded G37 Coupe.

The TEIN S.TECH kit is a Japanese lowering-spring set for FA and FG Honda Civics, chassis families from the model's eighth generation.

The TEIN S.TECH kit is a lowering-spring set for the JCE10L Lexus IS300, the North American inline-six version of the first-generation IS.

TEIN S.TECH SKM80-S3B00 is a spring kit for the 2007-2009 Mazda Mazdaspeed3 BK3P, lowering it about 1.0 inch front and 0.6 inch rear.

TEIN S.TECH is a Japanese lowering-spring line for road cars, notable for a more aggressive drop while remaining compatible with standard dampers.