Lack Rack VESA Mount

To install this specific mount, you must use the provided hardware to secure the bracket directly into the top or side panel of the IKEA Lack table. Because the Lack table is made of a honeycomb paper core encased in thin wood veneer, the mount is designed to bite into the material and distribute weight over a wide surface area. It is crucial to use the included wood screws to ensure a tight, secure fit.

The weight capacity is strictly limited by the structural integrity of the IKEA Lack table itself, rather than the steel mount, generally safely holding monitors up to 15 pounds. Heavy ultrawide gaming monitors are not recommended unless the table is firmly secured to a solid wall. Attempting to mount a display heavier than the table's rating will likely cause the thin veneer to tear.

Yes, installing a VESA mount onto an IKEA Lack table requires drilling pilot holes to secure the metal bracket firmly in place. The mount typically comes with a paper drilling template to ensure you hit the internal wooden framing blocks inside the table. Attempting to use the mount without properly drilling and securing the screws will result in the monitor pulling out the thin veneer.

Yes, the Lack Rack VESA Mount is specifically designed to support the industry-standard 75x75mm and 100x100mm VESA mounting patterns. You simply use standard machine screws to attach your specific display to the back of the metal bracket. It ensures a flush, secure fit against the side of the Lack table without interfering with standard cable management.