description Makita AN911 Overview
The Makita AN911 is a 30° clipped head framing nailer combining an aluminum body with a lightweight design (7.6 lbs). It drives 2" to 3.5" clipped head nails and features tool-free jam release and adjustable depth. The 30° magazine allows for better access in tight spaces. Clipped head nails reduce weight and cost per nail.
While not as light as magnesium models, the AN911 is durable and reliable, suitable for framers who prefer the 30° clipping head nail strips. It's a solid middle-tier option for production framing.
help Makita AN911 FAQ
What nails fit the Makita AN911?
Nail compatibility must be matched to the exact AN911 variant, magazine type, and regional manual. Do not rely on a listing that calls it a 30-degree clipped-head nailer unless the tool's nameplate and manual confirm that specification.
What compressor should I use with a Makita AN911?
Use a compressor and regulated air supply that meet the pressure range printed in the AN911 manual and on the tool. Framing work also requires enough delivered airflow to avoid pressure dropping during rapid firing.
Can the AN911 switch between sequential and bump firing?
Trigger behavior can vary by market and installed trigger assembly, so verify the exact tool rather than assuming both modes are included. Sequential firing is normally the more controlled choice for placement work.
How do I clear a jam in the Makita AN911 safely?
Disconnect the air hose first, remove the remaining fasteners, and follow the nose-opening procedure in the Makita manual. Never work on the magazine or driver blade while the pneumatic supply is connected.
explore Explore More
Reviews & Comments
Write a Review
Be the first to review
Share your thoughts with the community and help others make better decisions.
