description Makita AN920 Overview
The Makita AN920 is a 34° clipped head framing nailer that uses paper tape collated nails, offering a compact magazine design. It weighs 7.8 lbs with an aluminum body, driving 2" to 3.5" clipped head nails. The 34° angle provides excellent access in tight corners and valleys, and the paper tape collation allows for straight nails and less jamming. However, paper tape nails can be less common and may require specific storage.
The AN920 is a niche tool for framers who prefer the 34° system and need agility.
help Makita AN920 FAQ
What type of nails does the Makita AN920 use?
The Makita AN920 uses 34-degree clipped-head framing nails held together with paper tape collation. It is designed for 2-inch to 3.5-inch fasteners, subject to the limits in the manufacturer's manual.
Why does the Makita AN920 use a 34-degree magazine?
The steep 34-degree angle lets the magazine hold clipped-head nails in a relatively compact arrangement and can improve access in corners and roof valleys. It also means the nails are not interchangeable with every 21-degree plastic-collated framing nailer.
How heavy is the Makita AN920 framing nailer?
The AN920 is listed at approximately 7.8 pounds and uses an aluminum body to limit tool weight. Its pneumatic design still requires an air hose and a compressor on the job site.
Is the Makita AN920 suitable for roofing and wall framing?
It is intended for framing applications such as wall construction, sheathing, decking, and other heavy-duty wood assembly. The 2-inch to 3.5-inch nail range makes it suitable for structural work rather than small trim.
explore Explore More
Reviews & Comments
Write a Review
Be the first to review
Share your thoughts with the community and help others make better decisions.
