Pine-Sol Multi-Surface Cleaner

Yes, Pine-Sol is safe to use on hard, non-porous surfaces, including sealed hardwood floors, but you should avoid using it on unfinished or unsealed wood. You need to mix it with water according to the bottle's dilution instructions and avoid letting the liquid pool. It is always best to test it in an inconspicuous area first to ensure the finish remains intact.

Yes, the original Pine-Sol Multi-Surface Cleaner is registered with the EPA as a broad-spectrum disinfectant and is proven to kill 99.9% of germs, including Salmonella and Staphylococcus. To ensure proper disinfection, the hard surface must remain visibly wet with the solution for at least 10 minutes before wiping. This makes it highly effective for bathroom and kitchen cleanup.

Absolutely not, mixing Pine-Sol with bleach or any other ammonia-based cleaners can create highly toxic and potentially lethal chloramine gases. Pine-Sol should always be mixed only with water unless following strict, specific manufacturer guidelines. Always ensure the room is well-ventilated when using strong chemical cleaners.

For general cleaning on surfaces like countertops and floors, rinsing is usually not required if you have diluted the Pine-Sol correctly. However, if you are using it on surfaces that come into direct contact with food, you must rinse the area thoroughly with plain water. Leaving heavy residue on some floors can also cause them to become dangerously slippery.